Install the "printer-driver-brlaser" package for printing with:
- HL-1110 series
- HL-1200 series
- HL-L2300D series
- HL-L2320D series
- HL-L2340D series
- HL-L2360D series
- Lenovo M7605D
The following printers can be used as well with the "printer-driver-brlaser" package. You need to manually assign this driver to the printer for it to work:
- DCP 7010 (L)
- HL-2310D seems to work perfectly with the PPD file for HL-2300D.
Installation of brother MFC 4in1 machines (print, copy, scan, fax) e.g. MFC-7440N, MFC-7840 MFC-7840W on 64-bit systems.
- USB fax/modem AT command access via gtkterm (cutecom lacks AT command echo, gfax does not know the proper AT-command set)
- USB fax with efax-gtk
LAN fax from within ?OpenOffice/LibreOffice (PDF files) (legacy versions only, since the spadmin tool is no longer available)
- LAN fax from the command line
LAN and USB printing, e.g. via the lpr command
- Administration from the CUPS web console
LAN colour scan via xsane and most other scan GUIs
- LAN scan to file usin the 'copy' button on MFC panel
Special # dialcodes such as 31# are offered via the mechanical keys of the MFC device, but not while faxing from software. There may be workarounds using phone routers or modems to permanently suppress caller-ID, rather than on a call-by-call basis via 31#
Running the 7840 and 7840W (W offers WLAN as well).
You only need an URI the above URI, .ppd file, and the proper driver installed. Replace 192.168.xxx.xxx with the real IP address of the Brother.
126.96.36.199 is the default IP address of a Brother print server - if the APIPA protocol is disabled via MFC LCD-panel menu.
Printer URI may be one of:
lpd://192.168.xxx.xxx/BRFAX printername : BRFAX dnssd://Brother%20MFC-7440N._pdl-datastream._tcp.local/ usb://Brother/MFC-7440N?serial=000333333333
Then find your printer at http://localhost:631/printers/BRFAX
Refer to /usr/share/cups/model/brfax_cups.ppd file manually when adding printers via KDE sys-set GUI and use above manual URI:
Access the Brother setup from a web browser at http://192.168.xxx.xxx (user:admin, password:access)
It's recommended to print out the MFC configuration or network setup via the "report" (local language may differ) button on the LCD panel of the Bro first, to make sure your LAN is set up OK.
Download all drivers from the official Brother link below. Scan & print install works pretty flawlessly. Install .deb packages manuall using dpkg -i or similar.
sudo ./setupSaneScan1 # OR setupSaneScan2, 3, 4... depending on your MFC model # verify the install dpkg -l | grep Brother
The installer (linux-brprinter-installer-2.0.0-1) will download (if a debian system is detected) :
and provide uninstaller_MFC7440N, uninstaller_brscan3 , uninstaller_brscan-skey script files in the directory from where it was started.
The installer will tell you that it ran lpadmin -p MFC7440N -v socket://192.168.100.101 -E and brsaneconfig3 -a name=MFC-7440N model=MFC-7440N ip=192.168.100.101
Files provided by Brother packages:
- brfaxd - the fax daemon (binary only)
- usb4brfaxd - USB helper (binary only)
- DRIVER="brusbmfc.ko" - the modem driver module
- /dev/brusbmfc - bro USB MFC modem device name aka /dev/modem
- /opt/brother/modem/ - install path
- /etc/init.d/brfaxservice start / stop / restart
USB modem/fax lpd driver
http://support.brother.com/g/s/id/linux/en/instruction_fmd3.html about the SPIN_LOCK_UNLOCKED bug.
Faxmodem install requires a little attention (as of 3/2015, may improve later. till today, bro has not yet found the time to repack their .deb file). Basically one must follow bro instructions. Still one may be required to unpack the modem .deb manually and copy all files and run all scripts manually. Also one might be left with manually adding a new lpd printer named BRFAX as described above. The brusbmfc.c code must be altered as instructed by bro as root, run make asf. (Step 6. : Open the following file using a text editor with the "sudo" command. /opt/brother/modem/src/brusbmfc.c Change the 174th line as follows:
- replace old line:
- static spinlock_t my_lock = SPIN_LOCK_UNLOCKED;
- with new line:
- static DEFINE_SPINLOCK(my_lock);
also a libusb run time error may occur - to remedy, install via synaptic pack manager the dev and debug versions of libusb (the more the merrier, hard to pinpoint which particular pack was missing). That's all the errors I got, but your mileage may vary.
Test via LAN and USB
efax-gtk should give you something like:
efax-0.9a: 18:26:59 opened /dev/brusbmfc efax-0.9a: 18:27:11 using OKBROTHER8C5-C45 in class 2 efax-0.9a: 18:27:13 dialing T*31#032999999 efax-0.9a: 18:27:31 The remote ID is "+4932999999" efax-0.9a: 18:27:31 connected efax-0.9a: 18:27:39 session 196lpi 14.4kbps 8.5"/215mm any 1D - - 0ms efax-0.9a: 18:27:39 header:[2015-02-28 18:26 Mr. Smith (+49407777777) --> *31#032999999 1/1] efax-0.9a: 18:27:43 Warning: EOF before RTC efax-0.9a: 18:27:47 sent 20+2291 lines and 9302+0 bytes, in 8 secs at 9302 bps efax-0.9a: 18:27:51 failed page /home/you/faxout/tf2.pdf.001 efax-0.9a: 18:27:53 finished - success
As of 2015, the regular (mint 17.2 auto suggested) gfax via efax does not work any longer, since the AT commandset of efax grew incompatible (software rot). Having /usr/bin/brpcfax going inside Open/Libre Office is the better way to fax anyhow (proper logging via bro debuglevel 4).
A module make & make install is necessary after every kernel upgrade.
Firmware updates are apparently only doable from Windows.
If you run the scanner installer (linux-brprinter-installer-2.0.0-1.gz), you will be asked to type in the model name MFC-7440N and the printer's IP address (depends on your net setup) (same address where the MFC's web interface).
Running brsaneconfig3 is required, else xsane will tell you that 'it cannot connect to the brother scanner'.
Use CUPS to print and XSane or another scanning tool to scan.
Some fax commands:
brpcfax -o fax-number=032999999999 ~/faxout/tf.ps brpcfax -o fax-broadcast=/home/user1/list.txt testprint.ps /usr/bin/brpcfax -P BRFAX -o Paper=A4 ...
* As of 2015, often the fax install puts BRFAX on usb:/dev/usb/lp0, while in fact lp1 is what shows after plugging the browser via USB. Change that to usb://Brother/MFC-7440N?serial=000111111111 (autodetect your serial via cups printer setup) and you willa have a working brpcfax
USB: Fax out via "OpenOffice writer" requires the USB cable connected (MFC acts as a USB telephone modem). Print, Copy, Scan do not require a USB connection, but can be done via network instead. If you want everything (COPY, FAX, SCAN, PRINT) and use a single cable only, plug in the USB cable and omit the network cable.
Linux Mint ships with some brother postscript drivers (foomatic, BR3), but they do not fully work on the 7440N. Mint also ships with drivers for model number 7450 which will give you lots of white paper sheets. You actually need a downloaded brother driver file such as cupswrapperMFC7440N-2.0.2-1.i386.deb and have the original MFC7440N.ppd file. Accept no substitute.
It is also worth noting that the all-important MFC7440N.ppd file cannot be simply extracted from the bro driver archive .gz files. Instead some script will generate it via hexdump. To do that manually, find the part in the script with the hexdump. After regular install via bro script, keep a copy of the special file MFC7440N.ppd from /etc/cups/ppd or /usr/share/ppd or /opt/brother/... or /usr/share/cups/model/ .
Download brscan2 from https://support.brother.com/g/s/id/linux/en/download_scn.html
- On 64-bit systems you may have to copy some files
cp /usr/lib64/sane/libsane-brother2.so.1.0.7 /usr/lib/sane cp /usr/lib64/sane/libsane-brother2.so.1 /usr/lib/sane cp /usr/lib64/sane/libsane-brother2.so /usr/lib/sane cp /usr/lib64/libbrcolm2.so.1.0.1 /usr/lib cp /usr/lib64/libbrcolm2.so /usr/lib cp /usr/lib64/libbrscandec2.so.1 /usr/lib cp /usr/lib64/libbrscandec2.so /usr/lib cp /usr/lib64/libbrcolm2.so.1 /usr/lib /etc/init.d/udev restart
DCP-1510 with Brother Website Installer On Buster
For Buster (Debian 10), applying the instructions on the Brother webpage, and running
bash linux-brprinter-installer-2.2.2-1 DCP-1510
dcp1510lpr-3.0.1-1.i386.deb dcp1510cupswrapper-3.0.1-1.i386.deb brscan4-0.4.9-1.amd64.deb brscan-skey-0.3.1-1.amd64.deb
Gimp works with the scanner using the clickpath: File->Create-XSane->Device dialog->Scan
https://support.brother.com/g/b/downloadtop.aspx?c=us_ot&lang=en&prod=mfc7440n_all - 7440 Brother driver downloads
http://wiki.linux-club.de/opensuse/Brother_MFC-7820N - [DE] 7820N install on SuSE