Differences between revisions 67 and 71 (spanning 4 versions)
Revision 67 as of 2019-09-27 04:32:59
Size: 12208
Editor: PaulWise
Comment: use the service script for both sysvinit and systemd systems
Revision 71 as of 2021-05-12 07:37:41
Size: 12510
Comment: Rewrite lede. Remove audio troubleshooting sections, as one is already also documented on the page dedicated to Bluetooth audio, and the other seems to no longer apply.
Deletions are marked like this. Additions are marked like this.
Line 6: Line 6:
''Note: This page describes Debian Bluetooth information for end users.
For developer information see the [[Bluetooth]] page.''
Bluetooth is a standard providing short-range wireless communication between devices, generally for linking an audio device, mouse, keyboard, phone, etc. to your PC. This article documents how to configure a Bluetooth adapter with Debian and pair it with a device. Bluetooth audio is separately documented on the [[BluetoothUser/a2dp]] page.

Information for developers, related to the internal packaging of Bluetooth within Debian, can be found on the [[Bluetooth]] page.
Line 12: Line 13:
Line 23: Line 25:
----
Line 24: Line 28:
Install Bluetooth support (package DebPkg:bluetooth) :

{{{
aptitude install bluetooth
}}}

[[PackageManagement#
Installing.2C_removing.2C_upgrading_software|Install]] Bluetooth support (package DebianPkg:bluetooth) :
Line 42: Line 43:

----
Line 85: Line 88:
Line 86: Line 90:
Line 89: Line 94:
Line 91: Line 97:
Bluetooth-agent is part of package DebianPkg:bluez. So, if you use Debian testing or unstable, it should already be installed. Bluetooth-agent is a part of package DebianPkg:bluez, so it already be available if Bluetooth has been configured on your system.
Line 109: Line 115:
Line 121: Line 128:
=== Using a Bluetooth mouse ===

To use a Bluetooth mouse, first the support for Bluetooth must be installed on the system. See [[#Preparation|above]].

If your machine has a graphical environment with a GUI for pairing Bluetooth devices, chances are you can discover and pair your device easily from there. See above [[#Pairing_using_a_GUI_tool|how to pair using a GUI tool]].

If that does not succeed or you need to use the command line you can try running

{{{
hcitool scan
}}}

to get the bluetooth MAC address of the mouse.

An initial connection can be done with
{{{
hidd --connect <BTaddress>
}}}

where <BTaddress> is the MAC address obtained with the previous command.

To enable further automatic reconnections (e.g. on reboot), you need to run
{{{
/usr/share/doc/bluez/examples/test-device trusted <BTaddress>
}}}

to mark the device as trusted.

----
Line 171: Line 208:
Line 187: Line 225:
Line 188: Line 227:
{{{#!wiki important
This section is very outdated and needs a full rewrite.

KDE now uses !BlueDevil instead of KDEBluetooth. The programs listed below no longer exist. Devices can be paired with !BlueDevil by running bluedevil-wizard in your terminal.
}}}
Line 213: Line 256:
Line 214: Line 258:
Line 223: Line 268:
=== Impossible to connect to HSP/HFP ===

The version 3.6 of Bluez is buggy, and cannot switch from A2DP to HSP/HFP. This protocole allows the user to use microphone (but the sound has a lower quality). You can see /var/log/syslog:

{{{
[pulseaudio] module-bluez5-device.c: Refused to switch profile to headset_head_unit: Not connected
}}}

To solve this problem, you should downgrade into Bluez 3.5 or update it. Here is an example to install the version which stands in the experimental repo (3.40 when I write this article). First add in /etc/apt/sources.list the line

{{{
deb http://httpredir.debian.org/debian experimental main
}}}

and then run

{{{
sudo apt-get update && sudo apt-get -t experimental install bluez
}}}

After a restart of pulseaudio or a reboot, you should be able to use HSP/HFP.
Line 271: Line 295:
=== Can connect, but not to audio ===

If you get this error:

{{{
Connection Failed: blueman.bluez.errors.DBusFailedError: Protocol Not available
}}}

It is because the Pulseaudio backend cannot talk with Bluetooth because of a missing package. Install the package:

{{{
sudo apt-get install pulseaudio-module-bluetooth
}}}

... then make sure the module is loaded:

{{{
pactl load-module module-bluetooth-discover
}}}

Once that is done, delete the Bluetooth device from your configuration and pair it again.

=== Quality / A2DP issues ===

See [[BluetoothUser/a2dp]] for more information.

=== Audio device issues (With pairing, quality, codec selection, etc.) ===

See the [[BluetoothUser/a2dp]] page for full documentation on Bluetooth audio in Debian.

----
Line 298: Line 303:
 * HID : Human Interface Device
   * [[HOWTO/BluetoothMouse]] - Using a Bluetooth mouse
Line 304: Line 308:
----
Line 305: Line 311:
 * WikiPedia:Bluetooth
* [[WikiPedia:Bluetooth|Bluetooth- Wikipedia]]
Line 310: Line 317:
----
CategoryHardware CategoryModem

----

CategoryHardware CategoryModem CategorySound CategoryNetwork CategoryWireless

Translation(s): English - Français - Italiano - 日本語 (Nihongo)


Using Bluetooth in a Debian system

Bluetooth is a standard providing short-range wireless communication between devices, generally for linking an audio device, mouse, keyboard, phone, etc. to your PC. This article documents how to configure a Bluetooth adapter with Debian and pair it with a device. Bluetooth audio is separately documented on the BluetoothUser/a2dp page.

Information for developers, related to the internal packaging of Bluetooth within Debian, can be found on the Bluetooth page.

Introduction

We assume you have a Bluetooth adapter in your computer and a Bluetooth device (such as a mobile phone or PDA). This documents describes what you need to do to use Bluetooth to communicate with other Bluetooth devices.

The steps described below are required before you can use the services Bluetooth offers. Once you have setup Bluetooth, you can for example

  • exchange data with devices, such as sending music or videos to/from your phone
  • use a mobile phone to give your computer mobile internet access
  • use Bluetooth peripherals with your computer, such as a Bluetooth wireless mouse

See the links below for details.


Preparation

Install Bluetooth support (package bluetooth) :

Read /usr/share/doc/bluez/README.Debian.gz to get some understanding of what's going on.

Make sure the Bluetooth daemon is running. If it's not running, start it.

# service bluetooth status
bluetooth is running

# service bluetooth start


Pairing

For security reasons, Bluetooth devices will only talk to each other if they have been "introduced" first (a bit like in real life :-)). This is referred to as Pairing.

Note that pairing is usually only required the first time two devices interact. Afterwards, they will remember each other, and no exchange of PINs is necessary. This will however depend on the devices involved (on some devices this may be configurable).

To pair devices, you need a passkey-agent. Options are:

Pairing using a GUI tool

Install one of the following packages:

Log out of your desktop session and log back in - this is required for the pairing pop-up in the next step to appear correctly.

On your Bluetooth device you can now try to pair. On the device you need to choose something like the "setup", "connect" or "Bluetooth" menu and then search for Bluetooth devices. You should find your Debian system, called something like debian-0, where debian is the hostname of your Debian system. On your device, select the Debian system. The device will then ask for a PIN, you can make one up, (choose four digits, say 2309 ).

On your computer you will get a pop-up information balloon asking for the PIN, something like Pairing request from Phone (xx:xx:xx:xx:xx:xx) where Phone is the name of your phone and xx:xx:xx:xx:xx:xx is its MAC address.

Click on the information balloon.

Another window will pop-up. It asks for the PIN, enter the one you just made up. (e.g. 2309 ) and press [Enter].

Your phone sees that the PIN matches and shows it on its display.

Both devices are now paired.

Pairing using CLI

If you do not want to or cannot use Gnome or KDE, you can also use bluetooth-agent or bluetoothctl for the pairing.

Using bluetooth-agent

Bluetooth-agent is a part of package bluez, so it already be available if Bluetooth has been configured on your system.

Just start bluetooth-agent (as root), giving an arbitrary PIN, such as 4835:

# bluetooth-agent 4835

Then, as described above, choose something like the "setup", "connect" or "Bluetooth" menu on the device to be paired, and search for Bluetooth devices. Select your computer once found; the device should prompt you for a PIN. Now enter the PIN you gave to bluetooth-agent, and pairing is completed.

Note: Instead of initiating the pairing process from the phone, you can also initiate it from the computer. Start bluetoogh-agent as explained above, then run a command that will try to connect to the phone, e.g.

rfcomm connect hci0 <phone address>

where <phone address> is your phone's bluetooth address, as shown by hcitool scan (note that this will only work if the phone is discoverable, though the computer need not be). This will force a connection from computer to phone, which should cause the phone to ask you to confirm the connection attempt by prompting for a PIN. Enter the pin you used with bluetooth-agent.

Using bluetoothctl

If bluetooth-agent is not available, try bluetoothctl:

Start the bluetoothctl interactive command. Enter "help" to get a list of available commands.

  • Turn the power to the controller on by entering "power on". It is off by default.
  • Enter "devices" to get the MAC Address of the device with which to pair.
  • Enter device discovery mode with "scan on" command if device is not yet on the list.
  • Turn the agent on with "agent on".
  • Enter "pair MAC Address" to do the pairing (tab completion works).

  • If using a device without a PIN, one may need to manually trust the device before it can reconnect successfully. Enter "trust MAC Address" to do so.

  • Finally, use "connect MAC address" to establish a connection.

Using a Bluetooth mouse

To use a Bluetooth mouse, first the support for Bluetooth must be installed on the system. See above.

If your machine has a graphical environment with a GUI for pairing Bluetooth devices, chances are you can discover and pair your device easily from there. See above how to pair using a GUI tool.

If that does not succeed or you need to use the command line you can try running

hcitool scan

to get the bluetooth MAC address of the mouse.

An initial connection can be done with

hidd --connect <BTaddress>

where <BTaddress> is the MAC address obtained with the previous command.

To enable further automatic reconnections (e.g. on reboot), you need to run

/usr/share/doc/bluez/examples/test-device trusted <BTaddress>

to mark the device as trusted.


Troubleshooting

General pairing issues

In order for the pairing to work as described above, your computer's bluetooth interfaces must be discoverable. A bluetooth dongle may start off in hidden mode (bug report here)

To fix this you can run:

# dbus-send --system --dest=org.bluez /org/bluez/hci0 org.bluez.Adapter.SetMode string:discoverable

Or using hciconfig:

# hciconfig hci0 piscan

Then hciconfig should show the flags ISCAN PSCAN, indicating bluetooth is discoverable (i.e. can be scanned). After you finished pairing, it's best to make your computer hidden again:

# dbus-send --system --dest=org.bluez /org/bluez/hci0 org.bluez.Adapter.SetMode string:off

Or using hciconfig:

# hciconfig hci0 noscan

Helpful Commands

Display your Bluetooth device (for proof that it was installed properly)

hcitool dev

Search for remote Bluetooth devices

hcitool scan

Restart the Bluetooth services

sudo service bluetooth restart

Force connection to device

sudo hidd --connect <BT_Address>

Helpful Configuration Files

/etc/default/bluetooth - Default HID bluez setting - enable for mice and keyboards

HID2HCI_ENABLED=1

/etc/bluetooth/hcid.conf - HCI bluez settings - configure static device information

device 00:1E:52:FB:68:55 {
    name "Apple Wireless Keyboard";
    auth enable;
    encrypt enable;}

KDE Issues

This section is very outdated and needs a full rewrite.

KDE now uses BlueDevil instead of KDEBluetooth. The programs listed below no longer exist. Devices can be paired with BlueDevil by running bluedevil-wizard in your terminal.

Since the PIN should be implemented on a user level, we need to make some changes to /etc/bluetooth/hcid.conf

comment out the line

passkey "2309";

and add the following line directly below it (Note: kdebluetooth includes the program kbluepin):

# passkey "2309";
pin_helper /usr/bin/bluez-pin;

KDE also expects a file /etc/bluetooth/link_key to be present.

# touch /etc/bluetooth/link_key
# chmod 644 /etc/bluetooth/link_key
# service bluetooth restart

In KDE, run kbluetoothd. Click on the Bluetooth icon in the system tray, this loads Konqueror with the Bluetooth:// URL. You should be able to see your device and do some simple file transfers by clicking on the device and choosing the proper transfer protocol.

Scanning for the PC from your device should bring up a window in KDE that asks you for a PIN. Now you can send files to your PC (KDE should bring up a program to handle this).

GNOME topics

In DebianWheezy with GnomeShell the settings for Bluetooth can be found at

  • System Settings > Bluetooth: Lists paired devices, allows sending of data

  • in Nautilus in the ~/public folder: When opening this folder, you find a notification bar to define the sharing of data. This includes the sharing via WebDAV, but also via Bluetooth. Furthermore, one can enable receiving files via Bluetooth. These files are stored in ~/downloads.

  • in order to be able to receive files from a paired device enable the following options in "Personal File Sharing Preferences" (/usr/bin/gnome-file-share-properties):
    • Receive Files over Bluetooth / Receive files in Downloads folder over Bluetooth
    • Receive Files over Bluetooth / Notify about received files

Personal_File_Sharing_Preferences_Receive_Files_over_Bluetooth.png

Can't reconnect after sleep

You may notice that you can't automatically reconnect to a device after it goes to sleep. You would for example notice the following errors in your logs:

bluetoothd[487]: Authentication attempt without agent
bluetoothd[487]: Access denied: org.bluez.Error.Rejected

This could be because the device is not marked as "trusted". To fix this, try the following command in a bluetoothctl shell:

trust 00:1D:43:6D:03:26

... where 00:1D:43:6D:03:26 is the device identifier for the speaker.

You may also want to have Pulseaudio automatically connect to the newly discovered output, by adding this to ~/.config/pulse/default.pa:

# automatically switch to newly-connected devices
load-module module-switch-on-connect

Note: this fix was found in the Arch Linux wiki.

Audio device issues (With pairing, quality, codec selection, etc.)

See the BluetoothUser/a2dp page for full documentation on Bluetooth audio in Debian.


See also



CategoryHardware CategoryModem CategorySound CategoryNetwork CategoryWireless