Differences between revisions 100 and 101
Revision 100 as of 2018-02-23 12:41:02
Size: 5954
Editor: BoyuanYang
Comment: Use HTTPS for backports.debian.org, use stretch-backports in ext links
Revision 101 as of 2018-05-24 08:29:53
Size: 6299
Editor: BoyuanYang
Comment: Update info about cmdline
Deletions are marked like this. Additions are marked like this.
Line 27: Line 27:
In the following example, we will use "stretch" as the current codename for Debian Stable.
Please adjust the codename accordingly if you are using a different version of Debian.
Line 35: Line 38:
Line 42: Line 44:
{{{deb http://deb.debian.org/debian jessie-backports main contrib non-free}}} {{{deb http://deb.debian.org/debian stretch-backports main contrib non-free}}}
Line 44: Line 46:
{{{deb http://deb.debian.org/debian jessie-backports-sloppy main contrib non-free}}} (This line is available only after the release of Debian Stretch)

{{{deb http://deb.debian.org/debian stretch-backports-sloppy main contrib non-free}}}

(This line is available only after the release of Debian Stretch+1, or Debian Buster. Using it before the release of Debian Buster will cause errors!)
Line 60: Line 66:
deb http://deb.debian.org/debian jessie-backports main contrib non-free
deb http://deb.debian.org/debian jessie-backports-sloppy main contrib non-free
deb http://deb.debian.org/debian stretch-backports main contrib non-free # available after stretch release
#deb http://deb.debian.org/debian stretch-backports-sloppy main contrib non-free # available after buster release
Line 84: Line 90:
debian:/home/human# aptitude -t jessie-backports install iceweasel}}}
The {{{-t}}} option here specifies {{{jessie-backports}}} as the target release. This would install a newer version of Iceweasel from Backports instead of the older one from Debian stable release. (Note: that iceweasel isn't necessarily in the main backports repository but its maintainers have a [[http://mozilla.debian.net/|separate repository]].)
debian:/home/human# aptitude -t stretch-backports install cockpit}}}
The {{{-t}}} option here specifies {{{stretch-backports}}} as the target release. This would install a newer version of Cockpit and all its reverse dependencies from stretch-ackports instead of the older one from Debian stable release.
Line 99: Line 105:
service will be stopped at some point. service is already stopped.
Line 101: Line 107:
 1. replace {{{backports.org}}} with {{{http://httpredir.debian.org/debian}}} in {{{/etc/apt/sources.list*}}}.  1. replace {{{backports.org}}} with {{{http://deb.debian.org/debian}}} in {{{/etc/apt/sources.list*}}}.
Line 109: Line 115:
    dpkg-query -W | grep ~bpo     dpkg-query -W | grep '~bpo'

Translation(s): English - Deutsch - Español - Français - Italiano - Русский - 简体中文

DebianReleases > Backports


You are running Debian stable because you prefer the stable Debian tree. It runs great, there is just one problem: The software is a little bit outdated compared to other distributions. That is where backports come in.

Backports are recompiled packages from testing (mostly) and unstable (in a few cases only, e.g. security updates), so they will run without new libraries (wherever it is possible) on a stable Debian distribution. It is recommended to pick out single backports which fit your needs, and not to use all backports available.

This article illustrates how to:

  • configure your stable system to use the Backports repository
  • find a specific backport
  • install packages from the repository
  • have your backports upgraded automatically

For official instructions on how to use Debian Backports, visit https://backports.debian.org/Instructions/.

If you want to create a non-official backport of a package you need, have a look at SimpleBackportCreation.

If you want to build a backport with the intent of sharing it with others within Debian, see the BuildingFormalBackports page.


Configuring your stable system

In the following example, we will use "stretch" as the current codename for Debian Stable. Please adjust the codename accordingly if you are using a different version of Debian.

Adding the repository

Using Synaptic

  • Open Synaptic
  • Go to "Settings -> Repositories":

backports_synaptic_1.png

  • In the following dialog box, select the tab "Third-Party Software" and click on the "Add..." button in the lower left corner:

backports_synaptic_2.png

  • Copy the repository below, then hit the "Add Source" button:

deb http://deb.debian.org/debian stretch-backports main contrib non-free

(This line is available only after the release of Debian Stretch)

deb http://deb.debian.org/debian stretch-backports-sloppy main contrib non-free

(This line is available only after the release of Debian Stretch+1, or Debian Buster. Using it before the release of Debian Buster will cause errors!)

backports_synaptic_3.png

  • Finally, hit the "Reload" button in Synaptic's main panel to update the repository information on your system.

Using the command line

Become root and open the file /etc/apt/sources.list in your favorite editor:

human@debian:~$ su
Password:
debian:/home/human# nano /etc/apt/sources.list

Add the following lines:

# Backports repository
deb http://deb.debian.org/debian stretch-backports main contrib non-free # available after stretch release
#deb http://deb.debian.org/debian stretch-backports-sloppy main contrib non-free # available after buster release

If you are a free software enthusiast, you might want to remove the contrib and non-free sections. (See Debian package management for details.)

Now that you have added the repository, update APT's cache to include the backports in the list of available packages:

debian:/home/human# aptitude update

Done.

Using backports

Finding backports

There are a several different ways to find out if a backport of a certain Debian package exists. A pretty convenient one is using Debian's web-based package search (packages.debian.org). If you are running Iceweasel, simply use the built-in search plugin (Deb Search).

Installing backports on the command line

The backports repository is deactivated by default. So, if you want to install a backported package, you will have to state that explicitly.

For example:

debian:/home/human# aptitude -t stretch-backports install cockpit

The -t option here specifies stretch-backports as the target release. This would install a newer version of Cockpit and all its reverse dependencies from stretch-ackports instead of the older one from Debian stable release.

FAQ

Reporting bugs

Because of limitations in the Debian Bug Tracking System, any bugs relevant to backported packages still have to be reported to the debian-backports list.

Migrate from backports.org to backports.debian.org

On Sept. 5th, 2010, Backports became an official service (see announcement).

Systems configured to use backports.org should be reconfigured to use the new repository/URL (in /etc/apt/sources.list*), since backports.org service is already stopped.

  1. replace backports.org with http://deb.debian.org/debian in /etc/apt/sources.list*.

  2. run aptitude update

  3. remove the backports.org key from your keyring. Depending how you installed it...
    • apt-get purge debian-backports-keyring
      or

    • apt-key del 16BA136C

List installed backports

Out of all installed packages, which ones are backports? One way to tell is by version: all backports are tagged with ~bpo, for example, 24.5+1-6~bpo8+1, so at the command line you might say:

    dpkg-query -W | grep '~bpo'

External links