Method already stated at FlashPlayer.
Add required Identifier entry to example configuration.
|Deletions are marked like this.||Additions are marked like this.|
|Line 60:||Line 60:|
|Use of firmware/microcode used by the radeon DRM driver can be verified using the [[DebianMan:1/dmesg|dmesg]] command. For example:||* Use of firmware/microcode used by the radeon DRM driver can be verified using the [[DebianMan:1/dmesg|dmesg]] command. For example:|
|Line 69:||Line 69:|
|* If files were unable to be loaded, ensure the DebianPkg:firmware-linux-nonfree package is installed (refer to [[#Installation|Installation]]).|
|Line 70:||Line 71:|
|If files were unable to be loaded, ensure the DebianPkg:firmware-linux-nonfree package is installed (refer to [[#Installation|Installation]]).||* Screen flickering with Adobe Flash: see [[FlashPlayer#flickering]].|
|Line 85:||Line 86:|
|Identifier "My GPU"|
AMD/ATI Open Source Drivers (radeon, r128, mach64)
This page describes use of the open source display drivers for ATI/AMD graphics hardware on Debian systems. For information on the proprietary driver, see ATIProprietary.
The AMD/ATI graphics processing unit (GPU) series/codename of an installed video card can usually be identified using the lspci command. For example:
$ lspci -nn | grep VGA 01:00.0 VGA compatible controller : Advanced Micro Devices, Inc. [AMD/ATI] Barts PRO [Radeon HD 6850] [1002:6739]
See HowToIdentifyADevice/PCI for more information.
Support for AMD (nee ATI) graphics hardware is provided by the xserver-xorg-video-ati driver wrapper package, which depends on three hardware-specific driver packages:
The ati wrapper driver autodetects whether your hardware has a Radeon, Rage 128, or Mach64 or earlier chip and load the radeon, r128, or mach64 xorg video driver as appropriate.
Proprietary, binary-only firmware (aka microcode) was removed from the Debian kernel's radeon DRM driver in linux-2.6 2.6.29-1, to resolve Debian bug 494009. The firmware can be provided by installing the firmware-linux-nonfree package.
Without this package installed, poor 2D/3D performance in the radeon driver is commonly experienced. Some GPUs may require firmware to operate the X Window System.
The following procedure will install the open source display driver packages, DRI modules (for 3D acceleration) and driver firmware/microcode:
Add "contrib" and "non-free" components to /etc/apt/sources.list, for example:
# Debian 7 "Wheezy" deb http://http.debian.net/debian/ wheezy main contrib non-free
Update the list of available packages:
# apt-get update
# apt-get install firmware-linux-nonfree libgl1-mesa-dri xserver-xorg-video-ati
- Restart your system to load GPU device firmware.
Use of firmware/microcode used by the radeon DRM driver can be verified using the dmesg command. For example:
$ dmesg | grep -E 'drm|radeon' | grep -iE 'firmware|microcode' [ 3.685235] [drm] Loading BARTS Microcode [ 3.768988] platform radeon_cp.0: firmware: agent loaded radeon/BARTS_pfp.bin into memory [ 3.861487] platform radeon_cp.0: firmware: agent loaded radeon/BARTS_me.bin into memory [ 3.929626] platform radeon_cp.0: firmware: agent loaded radeon/BTC_rlc.bin into memory [ 4.442259] platform radeon_cp.0: firmware: agent loaded radeon/BARTS_mc.bin into memory
Screen flickering with Adobe Flash: see FlashPlayer#flickering.
In most cases, manual configuration for the open source display drivers is not required, as the Xorg X server automatically detects and configures available hardware.
Section "Device" Driver "radeon" Identifier "My GPU" ... Option "AccelMethod" "XAA" # XAA/EXA Option "AccelDFS" "1" # 1/0 On for PCIE, off for AGP # Manpage: Use or don't use accelerated EXA DownloadFromScreen hook # when possible. Option "AGPMode" "1" # 1-8 Does not affect PCIE models. Option "AGPFastWrite" "1" # 1/0 Does not affect PCIE models. Not recommended. Option "GARTSize" "64" # 0-64 Megabytes of gart (system) memory used. # Wrongly defaults to 8MB sometimes, see your logfile. # Bigger seems better. Option "EnablePageFlip" "1" # 1/0 Increases 3D performance substantially # seemingly in XAA mode only Option "ColorTiling" "1" # 1/0 Increases 3D performance substantially # affected stability only positively on my system EndSection