Differences between revisions 34 and 36 (spanning 2 versions)
Revision 34 as of 2010-12-27 17:40:50
Size: 4690
Editor: Thrystan
Comment:
Revision 36 as of 2011-01-22 13:19:01
Size: 4748
Editor: ?StevenMasfaraud
Comment:
Deletions are marked like this. Additions are marked like this.
Line 18: Line 18:
First try free drivers radeon and radeonhd, installing following packages : xserver-xorg-video-radeon, xserver-xorg-video-raeonhd and xserver-xorg-video-ati First try free drivers radeon and radeonhd, installing following packages : xserver-xorg-video-radeon, xserver-xorg-video-radeonhd and xserver-xorg-video-ati
Line 91: Line 91:
('''''xorg.conf does not exist in Squeeze and Sid''''')

Translation(s): English - Русский

(!) ?Discussion

This article discusses how to install and use the open-source Radeon and RadeonHD display drivers for X11.

Determining your hardware

Run this command to determine what kind of video card you have:

lspci -v | grep VGA

Supported Cards

The radeon driver supports R100/R200 (Radeon 7000 – Radeon 9250) and R300/R400/R500 (Radeon 9500 – Radeon X1950) class chips. See the radeon page on the X wiki for more information. The radeonhd driver is for R500 and newer cards. See the the radeonhd page on the X wiki for more info.

First try free drivers radeon and radeonhd, installing following packages : xserver-xorg-video-radeon, xserver-xorg-video-radeonhd and xserver-xorg-video-ati

Installing proprietary firmware

If free drivers don't work, try proprietary firmware. Binary-only firmware was removed from the radeon DRM drivers in linux-2.6 2.6.29-1, to resolve Debian bug 494009. It is now packaged in firmware-linux-nonfree.

For Debian Squeeze and later releases, you will need to install proprietary firmware if you have one of the following Radeon-based cards:

  • Radeon R100-family
  • Radeon R200-family
  • Radeon R300-family
  • Radeon R400-family
  • Radeon R500-family
  • Radeon R600
  • Radeon RS600
  • Radeon RS690
  • Radeon RS780
  • Radeon RV610
  • Radeon RV620
  • Radeon RV630
  • Radeon RV635
  • Radeon RV670
  • Radeon RV710
  • Radeon RV730
  • Radeon RV770

The firmware in question, id est the CP/PFP microcode, can be installed by first enabling the non-free repository for your Debian release and issuing the following command:

aptitude install firmware-linux-nonfree

Configuring the kernel

You will need Direct Rendering Manager as well as Accelerated Graphics Port support in your kernel, preferably as modules. If you are using the stock Debian kernel, you should already have these. To check for DRM support, issue this command:

grep DRM_RADEON /boot/config-$(uname -r) 

The output should be:

CONFIG_DRM_RADEON=m

If this value is n, then you will have to rebuild your kernel.

To check for AGP support, run:

grep AGP /boot/config-$(uname -r)

The output should be:

CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m

Note that you will only need support for your specific chipset.

If you do need to rebuild your kernel, you can find AGP under:

  • Device Drivers --->

    • Graphics Support --->

      • /dev/agpgart (AGP Support) --->

        • (Your chipset)

and DRM under:

  • Device Drivers --->

    • Graphics Support --->

      • Direct Rendering Manager --->

        • ATI Radeon

Editing /etc/X11/xorg.conf

(xorg.conf does not exist in Squeeze and Sid) Essentially, you need to set your device's driver to either "radeon" or "radeonhd" as such:

Section "Device"
    Identifier     "Device0"
    Driver         "radeon"
EndSection

There are also plenty of options for the driver too. You can find out about them in radeon's man page:

man 4 radeon

Enabling 3D acceleration

It is necessary to install driver libraries in order to utilize the card's 3D capabilities:

aptitude install libgl1-mesa-dri

Testing performance

First, you will need the Mesa utilities:

aptitude install mesa-utils

To determine whether 3D acceleration is working, use the glxinfo tool. Run the following command:

glxinfo | grep render

The output should be:

direct rendering: Yes

To see how many frames per second your video card is putting out, install the mesa-utils package, then run the following command:

glxgears -info

Troubleshooting

Radeon Xpress 200M (R300) on laptop

During a long time, on laptops with Radeon Xpress 200M (R300) you may get some random colored stripes (especially after suspending display power). This is problably due to a bug into free driver. A solution may be to switch off, then switch on the backlight with radeontool (eponymic package).

sudo radeontool light off
sleep 1
sudo radeontool light on

See Also