This page tracks the individual packages that have problems specific to the Debian armel port. It does not include packages that fail on all archtectures.
When a package will build ok in sid, please remove its entry from here.
Contents
arm/armel inconsistencies
The following list covers all packages that
- build-depend/conflict with something on arm, but not on armel, or
- have the source package listed for Architecture: arm but not armel, or
- have binary packages disabled on armel in debian/control.
Most are of the form "[long list of arches not including armel]" or "[!arm]".
Please remove when resolved:
adeos: Kernel patch for resource sharing. See below
amiga-fdisk: all architectures have been enabled but are not being built. 497165
- bglibs (if dietlibc is ported)
- cvm (if dietlibc is ported)
gdb: needs gobjc support re-enabling 497161
- gnat-gdb (if gnat is ported
- integrit (if dietlibc is ported)
jack-audio-connection-kit 460084
kerry 461091
- lazarus (if fpc is ported)
- libdjbdns (if dietlibc is ported)
- matrixssl (if dietlibc is ported)
- ocamlgsl: can now be built
- partman-ext2r0: "Add to partman support for old ext2 (revision 0)" - for debian installer only. Only provided on [arm mipsel]. Do we want this?
- runit (if dietlibc is ported)
- skalibs (if dietlibc is ported)
uclibc: see below
- usplash has been uploaded but not built
usplash-theme-debian: 497147
whitelister 408794
The following packages are enabled on arm but not armel and rightly so:
- catsboot: "Boot glue for ARM CATS systems", which are based on the StrongARM110 CPU, an armv4 chip not supported by armel, which requires armv4t.
- gcc-4.0 (EABI support entered gcc in version 4.1)
- gnat-gdb (gnat has not been ported to armel yet. Or to arm, for that matter!)#
- linux-kernel-di-arm-2.6, linux-modules-di-arm-2.6: Corresponding -di-armel-2.6 debian installer packages are in unstable.
nwutil: Hardware utilities for ?NetWinder hardware, based on the StrongARM SA-110, which is armv4 and hence not supported in armel.
Alignment traps
If you say echo 5 > /proc/cpu/alignment you can make misaligned word and half-word accesses give a Bus Error instead of the default behaviour of silently returning a garbage value (specifically, in the case of a 4-byte word, *(addr & ~3) <<< (addr&3) where <<< is byte-rotate, not bit-shift.
Affected programs:
apt-get: dies immediately, even with no arguments. Is a case of #548842
- aptitude (also reproducable with "aptitude reinstall texlive-base-bin")
- gpgv (reproducible during "aptitude update")
- grotty (reproducible with "man gpgv")
- /usr/lib/apt/methods/http (reproducible during "aptitude update")
- nsgmls: dies during build of apt. Package: sp, Source: jade
- pdftex (reproducable with "aptitude reinstall texlive-base-bin")
Squeeze RC bugs
598370 libdc0: FTBFS on armel (FAIL: tth-test)
587463 libforks-perl: FTBFS on armel: Failed test 'Check if thread 1 is deadlocked'
593414 libibumad-dev: should depends on libibcommon-dev
595397 libsys-sigaction-perl: FTBFS on armel, unsupported
597932 openocd FTBFS on armel and hurd
511582 packaged opie 2.4, fixing testsuite failures on arm/armel
574349 splix performs unaligned memory access; prints blank pages an armel
Languages
clisp
598152 clisp: FTBFS on ARM EABI (armel)
Common Lisp works on arm, binary packages does not include armel in the source package's debian/control Package: sections.
In March 2008, Mat "mexon" made some progress and posted notes and patches for that attempt to port it to Maemo. See the messages to debian-arm and on sourceforge.
Cannot currently be built from source on Debian armel for lack of libffcall1-dev from ffcall, but it is in the archive nowadays.
Dependent packages:
- mcvs
- xindy
fpc
Deprecated: It is in the archive
Free Pascal compiler, a.k.a. fp-compiler. Exists in sid for arm, i386, amd64 and powerpc. Requires itself to compile itself and contains cpu-specific code generators: the arm one may or may not work unmodified on armel. Porting it means cross-compiling it, installing the cross-compiled version and using that to build the package, as well as possibly modifying its code generator for EABI.
An alternative is for dependent packages to move to (or also accept) gpc, the GCC-based pascal compiler (wishlist bugs have been filed where appropriate).
Dependent source packages:
gearhead 460067 suggesting move to gpc
- hedgewars: definitely needs fpc not gpc
imapcopy 460069 suggesting move to gpc
lazarus: A Rapid Application Development tool for Free Pascal. Move to gpc 460071 believed impossible
Upstream is working on arm EABI port of freepascal, and has already committed many fixes to svn,
gcc
Deprecated: It is in the archive
ARM EABI support was done for gcc-3.4 by CodeSourcery and published as source, but the changes were never backported into the mainline gcc-3.4.
gcc-3.4-dependent source packages:
gcc-3.3-dependent source packages:
varkon: see below but varkon is not in lenny.
gnat
Deprecated: It is in the archive
The GNU Ada translator. Requires itself to compile itself. Not provided on ARM old-EABI either.
There are three gnat packages: gnat-4.1, gnat-4.2 and gnat-4.3.
The Ada front-end to GCC is written in Ada (der!) and translates Ada into an internal GCC tree representation, which is then compiled with the usual GCC back-end. It seems we cannot get away with doing the initial translation of the Ada parts on some other machine and transporting that to armel to do the final compilation because header files and even some Ada package specs are system dependent.
Porting appears to require making an x86->ARM gcc/gnat cross-compiler, then if that compiler seems to work on small Ada programs, using that to cross-compile a native ARM Ada compiler, then using that to build the Debian package. This should only need doing for one of the versions to be able to create both Debian packages, modulo any system dependent modifications to header files and package specs.
On the gcc mailing list, Arnaud Charlet says that you need gnat-4.N to build cross-gnat-4.N, which looks like it might triple the already large amount of work required. However, the Debian build dependencies say that all of them will build with gnat>=4.1, so if we can make a cross-version of 4.1 to bootstrap a native compiler, that might work to compile 4.2 and 4.3 natively.
On the gcc list LG recommends starting with trunk (4.3) which is in stage 2 and "should be stable". The maintainer of ghdl, the only package requiring gnat-4.2, says gnat-4.2 is slated for removal anyway.
No Ada binaries site or other operating system distribution that supports ARM (ARMedslack, Maemo, NetBSD, ?OpenEmbedded, Rock Linux) provides precompiled gnat binaries for ARM.
As well as porting gnat-4.X, gcc-defaults will need its Package: gnat enabling for armel.
Dependent source packages:
- adabrowse
- adacgi
- adacontrol
- adasockets
- asis
- ghdl (requires gnat-4.2)
- gnade
- gnat-glade
- gnat-gps
- libaunit
- libaws
- libflorist
- libgtkada2
- libopentoken
- libtemplates-parser
- libtexttools
- libxmlada2
- music123
- plplot
- cl-plplot
- gnudatalanguage
- pdl
and [armel] needs adding to the arch list for most of these too.
If gnat is ported, the ada language bindings should be re-enabled for plplot (disabled by 478891).
Interesting sites:
The GNU Ada Team's source and binary distributions at SourceForge. No ARM port is included.
Big Online Book of Linux Ada Programming, chapter 2: "Installing Gnat on Linux"
AdaCore markets a version of gnat that runs on Windows VxWorks and targets XScale
Instructions to build cross-gnat for RTEMS target that successfully compiled "Hello world" to ARM.
gprolog
Lacks an ARM assembly code generator.
Libraries
dietlibc
Needs upstream support for ARM EABI (nowadays it has much improved), see 459482.
A tiny change (removing -mhard-float in arm/Makefile.add) lets the current version from SVN build on armel but the first test fails saying
/usr/lib/gcc/arm-linux-gnueabi/4.2.3/libgcc.a(_divdi3.o):(.ARM.exidx+0x0): undefined reference to `__aeabi_unwind_cpp_pr0'
It may be possible to make the existing "arm" build structure work on armel without inventing a whole new port by using #ifdef __ARM_EABI__ in the assembler fragments, but it requires at least:
- change to use the new system call interface
- make it link to gcc's soft-float library
- change function call entry/exit to allow thumb interworking (optional)
and an unknown number of other things.
Interestingly, most architectures only support static linking with dietlibc (binary package "dietlibc-dev"); dynamic linking is said to work on i386 and arm, but the dynamic-link binary package ("dietlibc") is only built for i386.
Dependent source packages:
- fgetty
- fnord
- libdjbdns
- libowfat
- matrixssl
- minit
- skalibs
- slidentd
- util-vserver
The following packages would like dietlibc, but can manage without it. If it is ported, they would like to have [armel] added to their Build-Depends: dietlibc-dev architecture lists:
- bglibs
- cvm
- e2fsprogs
- integrit
- runit
ffcall
Deprecated: It is in the archive
Foreign Function Call Libraries
Build of 1.10+2.41-3 fails on armel saying
gcc -x none -c vacall-arm.s vacall-arm.s: Assembler messages: vacall-arm.s:3: Warning: ignoring attempt to redefine built-in register 'sl' vacall-arm.s:4: Warning: ignoring attempt to redefine built-in register 'fp' vacall-arm.s:5: Warning: ignoring attempt to redefine built-in register 'ip' vacall-arm.s:6: Warning: ignoring attempt to redefine built-in register 'sp' vacall-arm.s:7: Warning: ignoring attempt to redefine built-in register 'lr' vacall-arm.s:8: Warning: ignoring attempt to redefine built-in register 'pc' vacall-arm.s:80: Error: selected processor does not support `ldfeqs f0,[sp,#20]' vacall-arm.s:84: Error: selected processor does not support `ldfeqd f0,[sp,#20]' make[2]: *** [vacall-arm.o] Error 1
ldfeqs and ldfeqd appear to be old arm FPA instructions, which either need replacing or reconfiguring to use softfloat. NetBSD and Clisp people have encountered the same problem without solving it yet, though Mat's clisp notes make considerable progress on it.
Dependent source packages (on libffcall1-dev):
clisp (598152)
- mlpcap
haskell-happs-*
Haskell libraries for building Internet applications
The old "happs" source package has now split into five: haskell-happs-{data,ixset,server,state,util}
Of which -util is marked for Architecture: i386, amd64 and the rest are for any but Build-Depend on haskell-happs-util-dev. This may be a legacy of 443053, an old bug.
haskell-happs-utils build fails if enabled on armel, saying:
Preprocessing library HAppS-Util-0.9.2.1... Building HAppS-Util-0.9.2.1... src/HAppS/Util/TH.hs:4:7: Could not find module `Language.Haskell.TH': Use -v to see a list of the files searched for. make: *** [build-ghc6-stamp] Error 1
lapack3
Exists for arm and armel, but installing it on either evokes a big fat warning:
x Critical lapack errors x x x x One or more critical lapack library errors were discovered when this x x package was built. As of the time of this writing, all known such x x errors are due to compiler and/or ld.so errors on the affected x x architectures. The lapack libraries in this set of packages then, while x x practically useless for serious numerical research, are provided here x x nonetheless to facilitate smooth upgrades of lapack into Debian as a x x whole.
lua-gtk
gtk bindings for the lua language version 5.1
Unlike every other liblua5.1-* package, lua-gtk is only enabled for i386 and amd64.
Enabling it for armel here, much of the testsuite fails, spewing Bus errors (indicative of misaligned 32-bit word data accesses).
497172. Closed but not fixed really, and an armel build dies with misaligned data acceses.
openmpi
Library for parallel applications has not been explicitly ported to ARMs, but is believed to work on most 32-bit Unices. On armel the configure dies saying:
configure: error: No atomic primitives available for arm-unknown-linux-gnueabi
Most Debian packages can use mpich instead, which is available on armel.
This source packages would build more completely if openmpi were available:
- petsc
These would use it if it were available:
- gromacs (for one binary package - it also has bindings to mpich)
- rmpi
openmpi is not included in lenny.
petsc
Parallel scientific library
This builds in two flavours:
- openmpi version [alpha amd64 i386 ia64 powerpc sparc]
- lam version [!the above = armel mips mipsel s390]
The lam version does not produce libpetsc2.3.3-dev, which is required by:
- libmesh
- petsc4py
purelibc
A system call virtualizing library, part of the View-OS project needs trivial patches to compile on armel to eliminate obsolete and unsupported system calls.
This package is new in lenny, and appears to need some general portability help.
System components
nsis
Nullsoft Scriptable Install System. Version 2.31-1 failed to build on armel 4 Oct 2007, dying at the very last moment, saying
Generating uninstaller... Error finding icon resources: installer, uninstaller icon size mismatch - see the Icon instruction's documentation for more information -- failing!
Current version is 2.37-2, and it has only succeeded on i386 and amd64.
vnc4
Virtual network computing software fails to build saying:
make[6]: Leaving directory `/build/buildd/vnc4-4.1.1+X4.3.0/unix/xc/programs/Xserver/hw/vfb' [...] c++ -o XFree86 -O3 -fsigned-char -L../../exports/lib -L/usr/X11R6/lib xkb/xf86KillSrv.o xkb/xf86VT.o xkb/xf86Private.o ../../programs/Xserver/hw/xfree86/common/xf86Init.o ../../programs/Xserver/hw/xfree86/common/xf86IniExt.o ../../programs/Xserver/hw/xfree86/common/libxf86.a ../../programs/Xserver/hw/xfree86/parser/libxf86config.a ../../programs/Xserver/hw/xfree86/os-support/libxf86_os.a ../../programs/Xserver/hw/xfree86/loader/libloader.a ../../programs/Xserver/hw/xfree86/common/libxf86.a dix/libdix.a os/libos.a ../../exports/lib/libXau.a ../../exports/lib/libXdmcp.a ../../lib/font/fontbase.o ../../lib/font/libfontbase.a Xext/libexts.a xkb/libxkb.a Xi/libxinput.a lbx/liblbx.a ../../lib/lbxutil/liblbxutil.a vnc/libvnc.a ../../../../common/rfb/librfb.a ../../../../common/Xregion/libXregion.a ../../../../common/network/libnetwork.a ../../../../common/rdr/librdr.a ../../programs/Xserver/hw/xfree86/common/libxf86.a Xext/libexts.a xkb/libxkb.a Xi/libxinput.a lbx/liblbx.a ../../lib/lbxutil/liblbxutil.a vnc/libvnc.a ../../../../common/rfb/librfb.a ../../../../common/Xregion/libXregion.a ../../../../common/network/libnetwork.a ../../../../common/rdr/librdr.a randr/librandr.a render/librender.a dix/libxpstubs.a mi/libmi.a Xext/libexts.a xkb/libxkb.a Xi/libxinput.a lbx/liblbx.a ../../lib/lbxutil/liblbxutil.a vnc/libvnc.a ../../../../common/rfb/librfb.a ../../../../common/Xregion/libXregion.a ../../../../common/network/libnetwork.a ../../../../common/rdr/librdr.a randr/librandr.a render/librender.a ../../programs/Xserver/hw/xfree86/os-support/libxf86_os.a -lz -lm -rdynamic -ldl -Wl,-rpath-link,../../exports/lib c++: ../../programs/Xserver/hw/xfree86/loader/libloader.a: No such file or directory make[5]: *** [XFree86] Error 1 make[5]: Target `all' not remade because of errors.
It succeeds on other architectures but not on "arm", with the same error.
Applications
iceape-browser
Web browser also known as mozilla-browser
Version 1.1.11-1 is in the repository but, when run, loops forever consuming 100% CPU.
ktoon
2D animation toolkit
Version 0.8.1-1 failed on armel on 25 Sep 2007 saying
ktprojectparser.cpp:215: error: no match for 'operator<<' in '((KTProjectParser*)this)->KTProjectParser::m_gradientStops [...]
The current version is 0.8.1-4 and fails thus on arm and armel.
varkon
CAD system. Needs gcc-3.3 to build because of -fwritable-strings in Makefiles. The latest upstream version removes this need 453009. Debian packages of the new version are now available but it is currently orphaned and needs a Debian sponsor for it to upload.