Attachment 'dmesg.txt'
Download 1 [ 0.000000] Initializing cgroup subsys cpuset
2 [ 0.000000] Initializing cgroup subsys cpu
3 [ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
4 [ 0.000000] KERNEL supported cpus:
5 [ 0.000000] Intel GenuineIntel
6 [ 0.000000] AMD AuthenticAMD
7 [ 0.000000] NSC Geode by NSC
8 [ 0.000000] Cyrix CyrixInstead
9 [ 0.000000] Centaur CentaurHauls
10 [ 0.000000] Transmeta GenuineTMx86
11 [ 0.000000] Transmeta TransmetaCPU
12 [ 0.000000] UMC UMC UMC UMC
13 [ 0.000000] BIOS-provided physical RAM map:
14 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
15 [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
16 [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
17 [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
18 [ 0.000000] BIOS-e820: 000000007f690000 - 000000007f69e000 (ACPI data)
19 [ 0.000000] BIOS-e820: 000000007f69e000 - 000000007f6e0000 (ACPI NVS)
20 [ 0.000000] BIOS-e820: 000000007f6e0000 - 000000007f700000 (reserved)
21 [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
22 [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
23 [ 0.000000] DMI present.
24 [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
25 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
26 [ 0.000000] last_pfn = 0x7f690 max_arch_pfn = 0x100000
27 [ 0.000000] MTRR default type: uncachable
28 [ 0.000000] MTRR fixed ranges enabled:
29 [ 0.000000] 00000-9FFFF write-back
30 [ 0.000000] A0000-BFFFF uncachable
31 [ 0.000000] C0000-CFFFF write-protect
32 [ 0.000000] D0000-DFFFF uncachable
33 [ 0.000000] E0000-EFFFF write-through
34 [ 0.000000] F0000-FFFFF write-protect
35 [ 0.000000] MTRR variable ranges enabled:
36 [ 0.000000] 0 base 000000000 mask 080000000 write-back
37 [ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable
38 [ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
39 [ 0.000000] 3 disabled
40 [ 0.000000] 4 disabled
41 [ 0.000000] 5 disabled
42 [ 0.000000] 6 disabled
43 [ 0.000000] 7 disabled
44 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
45 [ 0.000000] initial memory mapped : 0 - 01800000
46 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
47 [ 0.000000] 0000000000 - 0000400000 page 4k
48 [ 0.000000] 0000400000 - 0037000000 page 2M
49 [ 0.000000] 0037000000 - 00373fe000 page 4k
50 [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
51 [ 0.000000] RAMDISK: 37881000 - 37feffd1
52 [ 0.000000] Allocated new RAMDISK: 00100000 - 0086efd1
53 [ 0.000000] Move RAMDISK from 0000000037881000 - 0000000037feffd0 to 00100000 - 0086efd0
54 [ 0.000000] ACPI: RSDP 000fbf40 00024 (v02 ACPIAM)
55 [ 0.000000] ACPI: XSDT 7f690100 0006C (v01 _ASUS_ Notebook 11000910 MSFT 00000097)
56 [ 0.000000] ACPI: FACP 7f690290 000F4 (v04 A_M_I_ OEMFACP 11000910 MSFT 00000097)
57 [ 0.000000] ACPI: DSDT 7f690490 08C01 (v02 A1414 A1414000 00000000 INTL 20060113)
58 [ 0.000000] ACPI: FACS 7f69e000 00040
59 [ 0.000000] ACPI: APIC 7f690390 0005C (v02 A_M_I_ OEMAPIC 11000910 MSFT 00000097)
60 [ 0.000000] ACPI: MCFG 7f6903f0 0003C (v01 A_M_I_ OEMMCFG 11000910 MSFT 00000097)
61 [ 0.000000] ACPI: ECDT 7f690430 00055 (v01 A_M_I_ OEMECDT 11000910 MSFT 00000097)
62 [ 0.000000] ACPI: OEMB 7f69e040 00061 (v01 A_M_I_ AMI_OEM 11000910 MSFT 00000097)
63 [ 0.000000] ACPI: HPET 7f6990a0 00038 (v01 A_M_I_ OEMHPET 11000910 MSFT 00000097)
64 [ 0.000000] ACPI: GSCI 7f69e0b0 02024 (v01 A_M_I_ GMCHSCI 11000910 MSFT 00000097)
65 [ 0.000000] ACPI: SSDT 7f6a0c80 004F0 (v01 PmRef CpuPm 00003000 INTL 20060113)
66 [ 0.000000] ACPI: SLIC 7f6990e0 00176 (v01 _ASUS_ Notebook 11000910 MSFT 00000097)
67 [ 0.000000] ACPI: Local APIC address 0xfee00000
68 [ 0.000000] 1154MB HIGHMEM available.
69 [ 0.000000] 883MB LOWMEM available.
70 [ 0.000000] mapped low ram: 0 - 373fe000
71 [ 0.000000] low ram: 0 - 373fe000
72 [ 0.000000] node 0 low ram: 00000000 - 373fe000
73 [ 0.000000] node 0 bootmap 00012000 - 00018e80
74 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
75 [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
76 [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
77 [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
78 [ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334]
79 [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
80 [ 0.000000] #5 [00014a2000 - 00014a81d3] BRK ==> [00014a2000 - 00014a81d3]
81 [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
82 [ 0.000000] #7 [0000100000 - 000086efd1] NEW RAMDISK ==> [0000100000 - 000086efd1]
83 [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
84 [ 0.000000] found SMP MP-table at [c00ff780] ff780
85 [ 0.000000] Zone PFN ranges:
86 [ 0.000000] DMA 0x00000010 -> 0x00001000
87 [ 0.000000] Normal 0x00001000 -> 0x000373fe
88 [ 0.000000] HighMem 0x000373fe -> 0x0007f690
89 [ 0.000000] Movable zone start PFN for each node
90 [ 0.000000] early_node_map[2] active PFN ranges
91 [ 0.000000] 0: 0x00000010 -> 0x0000009f
92 [ 0.000000] 0: 0x00000100 -> 0x0007f690
93 [ 0.000000] On node 0 totalpages: 521759
94 [ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa200
95 [ 0.000000] DMA zone: 32 pages used for memmap
96 [ 0.000000] DMA zone: 0 pages reserved
97 [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
98 [ 0.000000] Normal zone: 1736 pages used for memmap
99 [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
100 [ 0.000000] HighMem zone: 2310 pages used for memmap
101 [ 0.000000] HighMem zone: 293260 pages, LIFO batch:31
102 [ 0.000000] Using APIC driver default
103 [ 0.000000] ACPI: PM-Timer IO Port: 0x808
104 [ 0.000000] ACPI: Local APIC address 0xfee00000
105 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
106 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
107 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
108 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
109 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
110 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
111 [ 0.000000] ACPI: IRQ0 used by override.
112 [ 0.000000] ACPI: IRQ2 used by override.
113 [ 0.000000] ACPI: IRQ9 used by override.
114 [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
115 [ 0.000000] Using ACPI (MADT) for SMP configuration information
116 [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
117 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
118 [ 0.000000] nr_irqs_gsi: 24
119 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
120 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
121 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
122 [ 0.000000] Allocating PCI resources starting at 7f700000 (gap: 7f700000:7f700000)
123 [ 0.000000] Booting paravirtualized kernel on bare hardware
124 [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
125 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34072 r0 d23272 u2097152
126 [ 0.000000] pcpu-alloc: s34072 r0 d23272 u2097152 alloc=1*4194304
127 [ 0.000000] pcpu-alloc: [0] 0 1
128 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517681
129 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=1b19edcb-9c03-4feb-a363-4892b5869ffa ro quiet
130 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
131 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
132 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
133 [ 0.000000] Enabling fast FPU save and restore... done.
134 [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
135 [ 0.000000] Initializing CPU#0
136 [ 0.000000] Initializing HighMem for node 0 (000373fe:0007f690)
137 [ 0.000000] Memory: 2056324k/2087488k available (2414k kernel code, 29680k reserved, 1266k data, 368k init, 1182280k highmem)
138 [ 0.000000] virtual kernel memory layout:
139 [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
140 [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
141 [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
142 [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
143 [ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB)
144 [ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB)
145 [ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB)
146 [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
147 [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
148 [ 0.000000] Hierarchical RCU implementation.
149 [ 0.000000] NR_IRQS:1280
150 [ 0.000000] Extended CMOS year: 2000
151 [ 0.000000] Console: colour VGA+ 80x25
152 [ 0.000000] console [tty0] enabled
153 [ 0.000000] hpet clockevent registered
154 [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
155 [ 0.000000] Fast TSC calibration using PIT
156 [ 0.000000] Detected 1666.688 MHz processor.
157 [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.37 BogoMIPS (lpj=6666752)
158 [ 0.004039] Security Framework initialized
159 [ 0.004047] SELinux: Disabled at boot.
160 [ 0.004060] Mount-cache hash table entries: 512
161 [ 0.004258] Initializing cgroup subsys ns
162 [ 0.004266] Initializing cgroup subsys cpuacct
163 [ 0.004274] Initializing cgroup subsys devices
164 [ 0.004279] Initializing cgroup subsys freezer
165 [ 0.004284] Initializing cgroup subsys net_cls
166 [ 0.004315] CPU: L1 I cache: 32K, L1 D cache: 24K
167 [ 0.004321] CPU: L2 cache: 512K
168 [ 0.004326] CPU: Physical Processor ID: 0
169 [ 0.004329] CPU: Processor Core ID: 0
170 [ 0.004336] mce: CPU supports 5 MCE banks
171 [ 0.004350] CPU0: Thermal monitoring enabled (TM2)
172 [ 0.004356] using mwait in idle threads.
173 [ 0.004366] Performance Events: Atom events, Intel PMU driver.
174 [ 0.004378] ... version: 3
175 [ 0.004382] ... bit width: 40
176 [ 0.004385] ... generic registers: 2
177 [ 0.004389] ... value mask: 000000ffffffffff
178 [ 0.004394] ... max period: 000000007fffffff
179 [ 0.004398] ... fixed-purpose events: 3
180 [ 0.004402] ... event mask: 0000000700000003
181 [ 0.004409] Checking 'hlt' instruction... OK.
182 [ 0.021526] ACPI: Core revision 20090903
183 [ 0.040475] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
184 [ 0.080527] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
185 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
186 [ 0.008000] Initializing CPU#1
187 [ 0.008000] Calibrating delay using timer specific routine.. 3332.90 BogoMIPS (lpj=6665808)
188 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
189 [ 0.008000] CPU: L2 cache: 512K
190 [ 0.008000] CPU: Physical Processor ID: 0
191 [ 0.008000] CPU: Processor Core ID: 0
192 [ 0.008000] CPU1: Thermal monitoring enabled (TM2)
193 [ 0.168104] CPU1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
194 [ 0.168130] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
195 [ 0.172072] Brought up 2 CPUs
196 [ 0.172079] Total of 2 processors activated (6666.28 BogoMIPS).
197 [ 0.172291] CPU0 attaching sched-domain:
198 [ 0.172299] domain 0: span 0-1 level SIBLING
199 [ 0.172304] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
200 [ 0.172316] domain 1: span 0-1 level MC
201 [ 0.172321] groups: 0-1 (cpu_power = 1178)
202 [ 0.172331] CPU1 attaching sched-domain:
203 [ 0.172336] domain 0: span 0-1 level SIBLING
204 [ 0.172341] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
205 [ 0.172352] domain 1: span 0-1 level MC
206 [ 0.172357] groups: 0-1 (cpu_power = 1178)
207 [ 0.172667] devtmpfs: initialized
208 [ 0.173421] regulator: core version 0.5
209 [ 0.173528] NET: Registered protocol family 16
210 [ 0.173697] ACPI: bus type pci registered
211 [ 0.173820] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
212 [ 0.173827] PCI: Not using MMCONFIG.
213 [ 0.174047] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
214 [ 0.174051] PCI: Using configuration type 1 for base access
215 [ 0.174815] bio: create slab <bio-0> at 0
216 [ 0.176671] ACPI: EC: EC description table is found, configuring boot EC
217 [ 0.178359] ACPI: Executed 1 blocks of module-level executable AML code
218 [ 0.185617] ACPI: Interpreter enabled
219 [ 0.185633] ACPI: (supports S0 S3 S4 S5)
220 [ 0.185681] ACPI: Using IOAPIC for interrupt routing
221 [ 0.185782] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
222 [ 0.188818] ACPI: BIOS _OSI(Linux) query ignored
223 [ 0.190913] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
224 [ 0.190919] PCI: Using MMCONFIG for extended config space
225 [ 0.202413] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
226 [ 0.203646] ACPI: No dock devices found.
227 [ 0.203883] ACPI: PCI Root Bridge [PCI0] (0000:00)
228 [ 0.204024] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e00000-0xf7e7ffff]
229 [ 0.204034] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
230 [ 0.204042] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
231 [ 0.204051] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7d00000-0xf7dfffff]
232 [ 0.204096] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e80000-0xf7efffff]
233 [ 0.204204] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7cf8000-0xf7cfbfff]
234 [ 0.204263] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
235 [ 0.204271] pci 0000:00:1b.0: PME# disabled
236 [ 0.204359] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
237 [ 0.204366] pci 0000:00:1c.0: PME# disabled
238 [ 0.204455] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
239 [ 0.204462] pci 0000:00:1c.1: PME# disabled
240 [ 0.204551] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
241 [ 0.204558] pci 0000:00:1c.3: PME# disabled
242 [ 0.204622] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
243 [ 0.204687] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
244 [ 0.204750] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
245 [ 0.204815] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
246 [ 0.204887] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7cf7c00-0xf7cf7fff]
247 [ 0.204952] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
248 [ 0.204959] pci 0000:00:1d.7: PME# disabled
249 [ 0.205187] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
250 [ 0.205197] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
251 [ 0.205208] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
252 [ 0.205218] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
253 [ 0.205229] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc81f]
254 [ 0.205240] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7cf7800-0xf7cf7bff]
255 [ 0.205280] pci 0000:00:1f.2: PME# supported from D3hot
256 [ 0.205287] pci 0000:00:1f.2: PME# disabled
257 [ 0.205349] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
258 [ 0.205505] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbff0000-0xfbffffff]
259 [ 0.205584] pci 0000:02:00.0: supports D1
260 [ 0.205589] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
261 [ 0.205597] pci 0000:02:00.0: PME# disabled
262 [ 0.205670] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xfbffffff]
263 [ 0.205681] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
264 [ 0.205752] pci 0000:01:00.0: reg 10 64bit mmio: [0xf7fc0000-0xf7ffffff]
265 [ 0.205766] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f]
266 [ 0.205842] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
267 [ 0.205851] pci 0000:01:00.0: PME# disabled
268 [ 0.205917] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff]
269 [ 0.205925] pci 0000:00:1c.3: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
270 [ 0.205991] pci 0000:00:1e.0: transparent bridge
271 [ 0.206027] pci_bus 0000:00: on NUMA node 0
272 [ 0.206039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
273 [ 0.206332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
274 [ 0.206455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
275 [ 0.206558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
276 [ 0.228865] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
277 [ 0.229110] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
278 [ 0.229351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
279 [ 0.229590] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
280 [ 0.229829] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
281 [ 0.230070] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
282 [ 0.230310] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
283 [ 0.230550] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
284 [ 0.230757] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
285 [ 0.230778] vgaarb: loaded
286 [ 0.230914] PCI: Using ACPI for IRQ routing
287 [ 0.231237] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
288 [ 0.231248] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
289 [ 0.236023] Switching to clocksource tsc
290 [ 0.238095] pnp: PnP ACPI init
291 [ 0.238133] ACPI: bus type pnp registered
292 [ 0.242069] pnp: PnP ACPI: found 13 devices
293 [ 0.242075] ACPI: ACPI bus type pnp unregistered
294 [ 0.242083] PnPBIOS: Disabled by ACPI PNP
295 [ 0.242106] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
296 [ 0.242113] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
297 [ 0.242131] system 00:08: ioport range 0x25c-0x25f has been reserved
298 [ 0.242138] system 00:08: ioport range 0x380-0x383 has been reserved
299 [ 0.242145] system 00:08: ioport range 0x400-0x41f has been reserved
300 [ 0.242152] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
301 [ 0.242159] system 00:08: ioport range 0x800-0x87f has been reserved
302 [ 0.242166] system 00:08: ioport range 0x480-0x4bf has been reserved
303 [ 0.242174] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
304 [ 0.242181] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
305 [ 0.242188] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
306 [ 0.242195] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
307 [ 0.242203] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
308 [ 0.242216] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
309 [ 0.242224] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
310 [ 0.242235] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
311 [ 0.242248] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
312 [ 0.242255] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
313 [ 0.242262] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
314 [ 0.242269] system 00:0c: iomem range 0x100000-0x7f6fffff could not be reserved
315 [ 0.242276] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
316 [ 0.277300] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
317 [ 0.277308] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
318 [ 0.277317] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
319 [ 0.277326] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
320 [ 0.277337] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
321 [ 0.277343] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
322 [ 0.277352] pci 0000:00:1c.1: MEM window: 0xf8000000-0xfbffffff
323 [ 0.277360] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
324 [ 0.277371] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
325 [ 0.277377] pci 0000:00:1c.3: IO window: 0xe000-0xefff
326 [ 0.277386] pci 0000:00:1c.3: MEM window: 0xf7f00000-0xf7ffffff
327 [ 0.277394] pci 0000:00:1c.3: PREFETCH window: 0x00000080400000-0x000000805fffff
328 [ 0.277405] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
329 [ 0.277409] pci 0000:00:1e.0: IO window: disabled
330 [ 0.277417] pci 0000:00:1e.0: MEM window: disabled
331 [ 0.277424] pci 0000:00:1e.0: PREFETCH window: disabled
332 [ 0.277441] pci 0000:00:1c.0: enabling device (0104 -> 0107)
333 [ 0.277457] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
334 [ 0.277466] pci 0000:00:1c.0: setting latency timer to 64
335 [ 0.277479] pci 0000:00:1c.1: enabling device (0106 -> 0107)
336 [ 0.277489] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
337 [ 0.277497] pci 0000:00:1c.1: setting latency timer to 64
338 [ 0.277513] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
339 [ 0.277520] pci 0000:00:1c.3: setting latency timer to 64
340 [ 0.277531] pci 0000:00:1e.0: setting latency timer to 64
341 [ 0.277540] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
342 [ 0.277547] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
343 [ 0.277553] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
344 [ 0.277559] pci_bus 0000:04: resource 1 mem: [0x80000000-0x801fffff]
345 [ 0.277565] pci_bus 0000:04: resource 2 pref mem [0x80200000-0x803fffff]
346 [ 0.277571] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
347 [ 0.277577] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff]
348 [ 0.277584] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf6ffffff]
349 [ 0.277590] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
350 [ 0.277596] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff]
351 [ 0.277602] pci_bus 0000:01: resource 2 pref mem [0x80400000-0x805fffff]
352 [ 0.277608] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
353 [ 0.277614] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
354 [ 0.277676] NET: Registered protocol family 2
355 [ 0.277850] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
356 [ 0.278437] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
357 [ 0.279357] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
358 [ 0.279816] TCP: Hash tables configured (established 131072 bind 65536)
359 [ 0.279822] TCP reno registered
360 [ 0.280012] NET: Registered protocol family 1
361 [ 0.280051] pci 0000:00:02.0: Boot video device
362 [ 0.280260] Unpacking initramfs...
363 [ 0.635629] Freeing initrd memory: 7611k freed
364 [ 0.641895] audit: initializing netlink socket (disabled)
365 [ 0.641917] type=2000 audit(1264698743.639:1): initialized
366 [ 0.642243] highmem bounce pool size: 64 pages
367 [ 0.642253] HugeTLB registered 4 MB page size, pre-allocated 0 pages
368 [ 0.645240] VFS: Disk quotas dquot_6.5.2
369 [ 0.645357] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
370 [ 0.645507] msgmni has been set to 1724
371 [ 0.645888] alg: No test for stdrng (krng)
372 [ 0.646000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
373 [ 0.646007] io scheduler noop registered
374 [ 0.646011] io scheduler anticipatory registered
375 [ 0.646015] io scheduler deadline registered
376 [ 0.646093] io scheduler cfq registered (default)
377 [ 0.646294] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
378 [ 0.646308] pcieport 0000:00:1c.0: setting latency timer to 64
379 [ 0.646503] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
380 [ 0.646516] pcieport 0000:00:1c.1: setting latency timer to 64
381 [ 0.646699] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
382 [ 0.646712] pcieport 0000:00:1c.3: setting latency timer to 64
383 [ 0.647002] isapnp: Scanning for PnP cards...
384 [ 1.000428] isapnp: No Plug & Play device found
385 [ 1.003471] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
386 [ 1.004228] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
387 [ 1.022748] serio: i8042 KBD port at 0x60,0x64 irq 1
388 [ 1.022762] serio: i8042 AUX port at 0x60,0x64 irq 12
389 [ 1.022965] mice: PS/2 mouse device common for all mice
390 [ 1.023005] Driver 'rtc_cmos' needs updating - please use bus_type methods
391 [ 1.024054] rtc_cmos 00:03: RTC can wake from S4
392 [ 1.024129] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
393 [ 1.024164] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
394 [ 1.024190] cpuidle: using governor ladder
395 [ 1.024194] cpuidle: using governor menu
396 [ 1.024203] No iBFT detected.
397 [ 1.024964] TCP cubic registered
398 [ 1.025269] NET: Registered protocol family 10
399 [ 1.026200] lo: Disabled Privacy Extensions
400 [ 1.026869] Mobile IPv6
401 [ 1.026875] NET: Registered protocol family 17
402 [ 1.026904] Using IPI No-Shortcut mode
403 [ 1.027079] registered taskstats version 1
404 [ 1.027579] rtc_cmos 00:03: setting system clock to 2010-01-28 17:12:25 UTC (1264698745)
405 [ 1.027690] Freeing unused kernel memory: 368k freed
406 [ 1.027986] Write protecting the kernel text: 2416k
407 [ 1.028048] Write protecting the kernel read-only data: 872k
408 [ 1.040807] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
409 [ 1.247535] thermal LNXTHERM:01: registered as thermal_zone0
410 [ 1.247553] ACPI: Thermal Zone [TZ00] (39 C)
411 [ 1.542287] SCSI subsystem initialized
412 [ 1.568775] usbcore: registered new interface driver usbfs
413 [ 1.568913] usbcore: registered new interface driver hub
414 [ 1.569092] usbcore: registered new device driver usb
415 [ 1.572699] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
416 [ 1.577479] ACPI: Lid Switch [LID]
417 [ 1.577822] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
418 [ 1.577839] ACPI: Sleep Button [SLPB]
419 [ 1.578139] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
420 [ 1.578153] ACPI: Power Button [PWRB]
421 [ 1.578452] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
422 [ 1.578466] ACPI: Power Button [PWRF]
423 [ 1.596826] Linux agpgart interface v0.103
424 [ 1.607078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
425 [ 1.607148] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
426 [ 1.607185] ehci_hcd 0000:00:1d.7: setting latency timer to 64
427 [ 1.607194] ehci_hcd 0000:00:1d.7: EHCI Host Controller
428 [ 1.607253] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
429 [ 1.607299] ehci_hcd 0000:00:1d.7: using broken periodic workaround
430 [ 1.607319] ehci_hcd 0000:00:1d.7: debug port 1
431 [ 1.611214] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
432 [ 1.611250] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
433 [ 1.648027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
434 [ 1.648104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
435 [ 1.648114] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
436 [ 1.648122] usb usb1: Product: EHCI Host Controller
437 [ 1.648129] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
438 [ 1.648136] usb usb1: SerialNumber: 0000:00:1d.7
439 [ 1.648495] usb usb1: configuration #1 chosen from 1 choice
440 [ 1.648689] hub 1-0:1.0: USB hub found
441 [ 1.648712] hub 1-0:1.0: 8 ports detected
442 [ 1.648881] agpgart-intel 0000:00:00.0: Intel IGD Chipset
443 [ 1.649273] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
444 [ 1.653258] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
445 [ 1.682722] uhci_hcd: USB Universal Host Controller Interface driver
446 [ 1.682815] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
447 [ 1.682834] uhci_hcd 0000:00:1d.0: setting latency timer to 64
448 [ 1.682843] uhci_hcd 0000:00:1d.0: UHCI Host Controller
449 [ 1.682877] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
450 [ 1.682923] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
451 [ 1.683022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
452 [ 1.683031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
453 [ 1.683038] usb usb2: Product: UHCI Host Controller
454 [ 1.683044] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
455 [ 1.683051] usb usb2: SerialNumber: 0000:00:1d.0
456 [ 1.683389] usb usb2: configuration #1 chosen from 1 choice
457 [ 1.683489] hub 2-0:1.0: USB hub found
458 [ 1.683511] hub 2-0:1.0: 2 ports detected
459 [ 1.683661] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
460 [ 1.683680] uhci_hcd 0000:00:1d.1: setting latency timer to 64
461 [ 1.683689] uhci_hcd 0000:00:1d.1: UHCI Host Controller
462 [ 1.683717] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
463 [ 1.683778] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
464 [ 1.683876] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
465 [ 1.683886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
466 [ 1.683893] usb usb3: Product: UHCI Host Controller
467 [ 1.683900] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
468 [ 1.683907] usb usb3: SerialNumber: 0000:00:1d.1
469 [ 1.684264] usb usb3: configuration #1 chosen from 1 choice
470 [ 1.684491] hub 3-0:1.0: USB hub found
471 [ 1.684516] hub 3-0:1.0: 2 ports detected
472 [ 1.684684] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
473 [ 1.684703] uhci_hcd 0000:00:1d.2: setting latency timer to 64
474 [ 1.684713] uhci_hcd 0000:00:1d.2: UHCI Host Controller
475 [ 1.684738] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
476 [ 1.684800] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
477 [ 1.684905] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
478 [ 1.684915] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
479 [ 1.684923] usb usb4: Product: UHCI Host Controller
480 [ 1.684930] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
481 [ 1.684938] usb usb4: SerialNumber: 0000:00:1d.2
482 [ 1.685394] usb usb4: configuration #1 chosen from 1 choice
483 [ 1.685638] hub 4-0:1.0: USB hub found
484 [ 1.685664] hub 4-0:1.0: 2 ports detected
485 [ 1.685828] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
486 [ 1.685849] uhci_hcd 0000:00:1d.3: setting latency timer to 64
487 [ 1.685859] uhci_hcd 0000:00:1d.3: UHCI Host Controller
488 [ 1.685886] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
489 [ 1.686194] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
490 [ 1.686299] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
491 [ 1.686308] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
492 [ 1.686316] usb usb5: Product: UHCI Host Controller
493 [ 1.686323] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
494 [ 1.686330] usb usb5: SerialNumber: 0000:00:1d.3
495 [ 1.686702] usb usb5: configuration #1 chosen from 1 choice
496 [ 1.686931] hub 5-0:1.0: USB hub found
497 [ 1.686957] hub 5-0:1.0: 2 ports detected
498 [ 1.693783] libata version 3.00 loaded.
499 [ 1.707486] ahci 0000:00:1f.2: version 3.0
500 [ 1.707525] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
501 [ 1.707601] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
502 [ 1.707708] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
503 [ 1.707720] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
504 [ 1.707731] ahci 0000:00:1f.2: setting latency timer to 64
505 [ 1.708214] scsi0 : ahci
506 [ 1.708804] scsi1 : ahci
507 [ 1.709001] scsi2 : ahci
508 [ 1.709173] scsi3 : ahci
509 [ 1.709826] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 27
510 [ 1.709835] ata2: DUMMY
511 [ 1.709841] ata3: DUMMY
512 [ 1.709845] ata4: DUMMY
513 [ 1.960022] usb 1-6: new high speed USB device using ehci_hcd and address 2
514 [ 2.028029] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
515 [ 2.029311] ACPI Warning for \_SB_.PCI0.IDE1.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
516 [ 2.029328] ata1.00: _GTF unexpected object type 0x1
517 [ 2.078538] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
518 [ 2.078545] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
519 [ 2.080753] ata1.00: _GTF unexpected object type 0x1
520 [ 2.081109] ata1.00: configured for UDMA/133
521 [ 2.095860] usb 1-6: New USB device found, idVendor=13d3, idProduct=5111
522 [ 2.095866] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=2
523 [ 2.095872] usb 1-6: Product: USB2.0 UVC VGA WebCam
524 [ 2.095877] usb 1-6: Manufacturer: Image Processor
525 [ 2.095881] usb 1-6: SerialNumber: USB2.0 UVC VGA WebCam
526 [ 2.096054] usb 1-6: configuration #1 chosen from 1 choice
527 [ 2.096748] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
528 [ 2.114961] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
529 [ 2.115078] sd 0:0:0:0: [sda] Write Protect is off
530 [ 2.115086] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
531 [ 2.115147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
532 [ 2.115451] sda: sda1 sda2 < sda5 >
533 [ 2.164816] sd 0:0:0:0: [sda] Attached SCSI disk
534 [ 2.407374] PM: Starting manual resume from disk
535 [ 2.447166] EXT3-fs: INFO: recovery required on readonly filesystem.
536 [ 2.447173] EXT3-fs: write access will be enabled during recovery.
537 [ 11.907119] kjournald starting. Commit interval 5 seconds
538 [ 11.907148] EXT3-fs: sda1: orphan cleanup on readonly fs
539 [ 11.907159] ext3_orphan_cleanup: deleting unreferenced inode 66944
540 [ 12.074472] ext3_orphan_cleanup: deleting unreferenced inode 1139172
541 [ 12.091234] ext3_orphan_cleanup: deleting unreferenced inode 141209
542 [ 12.105425] ext3_orphan_cleanup: deleting unreferenced inode 141205
543 [ 12.105447] ext3_orphan_cleanup: deleting unreferenced inode 141204
544 [ 12.113397] ext3_orphan_cleanup: deleting unreferenced inode 141211
545 [ 12.117787] ext3_orphan_cleanup: deleting unreferenced inode 23337
546 [ 12.117818] ext3_orphan_cleanup: deleting unreferenced inode 141467
547 [ 12.122343] ext3_orphan_cleanup: deleting unreferenced inode 141178
548 [ 12.131623] ext3_orphan_cleanup: deleting unreferenced inode 22043
549 [ 12.131653] ext3_orphan_cleanup: deleting unreferenced inode 21821
550 [ 12.137665] ext3_orphan_cleanup: deleting unreferenced inode 24478
551 [ 12.147179] ext3_orphan_cleanup: deleting unreferenced inode 23355
552 [ 12.155190] ext3_orphan_cleanup: deleting unreferenced inode 18791
553 [ 12.166882] EXT3-fs: sda1: 14 orphan inodes deleted
554 [ 12.166886] EXT3-fs: recovery complete.
555 [ 12.203668] EXT3-fs: mounted filesystem with ordered data mode.
556 [ 13.922698] udev: starting version 150
557 [ 14.864188] ACPI: SSDT 7f6a0190 00326 (v01 PmRef Cpu0Ist 00003000 INTL 20060113)
558 [ 14.865250] ACPI: SSDT 7f6a0550 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20060113)
559 [ 14.866676] Monitor-Mwait will be used to enter C-1 state
560 [ 14.866806] Monitor-Mwait will be used to enter C-2 state
561 [ 14.866868] Monitor-Mwait will be used to enter C-3 state
562 [ 14.866885] Marking TSC unstable due to TSC halts in idle
563 [ 14.867144] processor LNXCPU:00: registered as cooling_device0
564 [ 14.868104] ACPI: SSDT 7f6a00e0 000AB (v01 PmRef Cpu1Ist 00003000 INTL 20060113)
565 [ 14.869010] ACPI: SSDT 7f6a04c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20060113)
566 [ 14.872281] Switching to clocksource hpet
567 [ 14.883448] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
568 [ 14.883467] atl1c 0000:01:00.0: setting latency timer to 64
569 [ 14.887121] processor LNXCPU:01: registered as cooling_device1
570 [ 14.897347] ACPI: Battery Slot [BAT0] (battery present)
571 [ 14.897552] ACPI: AC Adapter [AC0] (off-line)
572 [ 14.981538] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
573 [ 15.441660] cfg80211: Using static regulatory domain info
574 [ 15.441668] cfg80211: Regulatory domain: US
575 [ 15.441674] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
576 [ 15.441683] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
577 [ 15.441692] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
578 [ 15.441701] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
579 [ 15.441710] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
580 [ 15.441720] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
581 [ 15.441729] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
582 [ 15.442359] cfg80211: Calling CRDA for country: US
583 [ 15.560824] Linux video capture interface: v2.00
584 [ 15.810746] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000
585 [ 15.818679] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
586 [ 15.818695] ath9k 0000:02:00.0: setting latency timer to 64
587 [ 15.867590] ath: EEPROM regdomain: 0x60
588 [ 15.867598] ath: EEPROM indicates we should expect a direct regpair map
589 [ 15.867607] ath: Country alpha2 being used: 00
590 [ 15.867611] ath: Regpair used: 0x60
591 [ 15.882354] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
592 [ 15.907691] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5111)
593 [ 15.909195] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input6
594 [ 15.909462] usbcore: registered new interface driver uvcvideo
595 [ 15.909577] USB Video Class driver (v0.1.0)
596 [ 15.997763] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
597 [ 15.997847] HDA Intel 0000:00:1b.0: setting latency timer to 64
598 [ 16.136690] hda_codec: ALC269: BIOS auto-probing.
599 [ 16.137297] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
600 [ 16.175892] phy0: Selected rate control algorithm 'ath9k_rate_control'
601 [ 16.177504] Registered led device: ath9k-phy0::radio
602 [ 16.177603] Registered led device: ath9k-phy0::assoc
603 [ 16.177692] Registered led device: ath9k-phy0::tx
604 [ 16.177780] Registered led device: ath9k-phy0::rx
605 [ 16.177815] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8320000, irq=17
606 [ 17.348711] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
607 [ 17.473108] EXT3 FS on sda1, internal journal
608 [ 17.603013] loop: module loaded
609 [ 19.202779] fuse init (API version 7.13)
610 [ 19.588141] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
611 [ 20.942827] apm: BIOS not found.
612 [ 22.623445] Bluetooth: Core ver 2.15
613 [ 22.623619] NET: Registered protocol family 31
614 [ 22.623629] Bluetooth: HCI device and connection manager initialized
615 [ 22.623640] Bluetooth: HCI socket layer initialized
616 [ 22.683955] Bluetooth: L2CAP ver 2.14
617 [ 22.683966] Bluetooth: L2CAP socket layer initialized
618 [ 22.718582] Bluetooth: RFCOMM TTY layer initialized
619 [ 22.718596] Bluetooth: RFCOMM socket layer initialized
620 [ 22.718604] Bluetooth: RFCOMM ver 1.11
621 [ 22.738650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
622 [ 22.738661] Bluetooth: BNEP filters: protocol multicast
623 [ 22.815648] Bridge firewalling registered
624 [ 22.906190] Bluetooth: SCO (Voice Link) ver 0.6
625 [ 22.906200] Bluetooth: SCO socket layer initialized
626 [ 24.550675] ADDRCONF(NETDEV_UP): wlan0: link is not ready
627 [ 24.552369] lp: driver loaded but no devices found
628 [ 24.573083] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
629 [ 24.574373] ADDRCONF(NETDEV_UP): eth0: link is not ready
630 [ 24.581598] ppdev: user-space parallel port driver
631 [ 27.311860] [drm] Initialized drm 1.1.0 20060810
632 [ 27.403941] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
633 [ 27.403951] i915 0000:00:02.0: setting latency timer to 64
634 [ 27.414741] i915 0000:00:02.0: irq 29 for MSI/MSI-X
635 [ 27.414755] [drm] set up 7M of stolen space
636 [ 27.520190] integrated sync not supported
637 [ 27.935304] integrated sync not supported
638 [ 27.943687] Console: switching to colour frame buffer device 128x37
639 [ 27.943718] fb0: inteldrmfb frame buffer device
640 [ 27.943727] registered panic notifier
641 [ 27.948997] ACPI Warning: _BQC returned an invalid level (20090903/video-631)
642 [ 27.962003] acpi device:2b: registered as cooling_device2
643 [ 27.963053] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
644 [ 27.963187] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
645 [ 27.963247] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
646 [ 27.989978] [drm] Big FIFO is enabled
647 [ 28.052611] [drm] Big FIFO is enabled
648 [ 28.052631] [drm] LVDS-8: set mode 1024x600 e
649 [ 28.052643] [drm] Big FIFO is enabled
650 [ 28.192849] [drm] Big FIFO is enabled
651 [ 28.375835] integrated sync not supported
652 [ 28.512878] integrated sync not supported
Attached Files
To refer to attachments on a page, use attachment:filename, as shown below in the list of files. Do NOT use the URL of the [get] link, since this is subject to change and can break easily.- [get | view] (2010-01-28 09:19:36, 1.5 KB) [[attachment:cpuinfo.txt]]
- [get | view] (2010-01-28 09:20:13, 39.6 KB) [[attachment:dmesg.txt]]
- [get | view] (2010-01-28 09:20:34, 9.2 KB) [[attachment:lspci.txt]]
You are not allowed to attach a file to this page.